PERFORMANCE
PACK INCLUDES
SMARTY DIESEL TUNER
(Item# SM-03A)
Fast guide to Smarty’s special Features
- CaTCHER software's inside
- Ten different performance levels.
- Fastest download in the industry, a typical ECM update takes just two minutes.
- ABS tire height updates in just seconds.
- Not traceable by the Dealer in the stock setting. Smarty leaves no footprint.
- Cold weather 3 Cylinder High Idle is enabled in all softwares .
- Reads Diagnostic Trouble Codes in plain text.
- No tools required, no fuses to pull.
- USB built in for simple updates .
- Most complete keyboard in the industry.
- Reliable, it works off your OEM ECM hardware. |
|
FAST GUIDE TO SMARTY'S SOFTWARE
|
Smarty’s Software Levels 0 – 9
SW# 1 : Fuel Saver
SW# 2 : Only more fuel and Boost fooling
SW# 3 : Like # 2 + added timing
SW# 4 : “Soft” CaTCHER no added timing
SW# 5 : Like # 4 + added Timing
SW# 6 : Mild CaTCHER no added timing
SW# 7 : Like # 6 + added Timing
SW# 8 : CaTCHER no added timing
SW# 9 : CaTCHER with Timing
|
Software number Zero...
About half the power of a stock software. Use it whenever reduced power is desired or when you have to make sure that NO SMOKE is produced .
Software number One...
The Fuel Saver software. Mpg gains vary, in most cases a + 2Mpg has been reported. Please notice that the timing in this software is rather aggressive. HEAVY TOWING is not recommended with this software.
Software number Two...
This software increases the fuel delivered by the ECM and does the boost fooling .
Software number :Three...
Same as software # 2 but timing has been added.
CaTCHER softwares from number : Four to number Nine...
The even numbered softwares are identical to the odd numbered ones, except for the timing. The softwares without added timing are intended for use with timing adding boxes.
The power gain at top Rpm with these softwares is almost identical. These softwares differ greatly in HOW they get there. Than higher the software number then more aggressive the throttle response from idle speed up. Aggressive to the point that the softwares Eight and Nine can become difficult to handle on slippery roads. Please be very careful when you use these softwares for the first time! It takes some time to learn how to handle them. |
MAGNUM
FORCE AIR INTAKE
STAGE
ONE MAGNUM FORCE INTAKE (Item
# 10071)
GET UP TO 24 HP
GAIN
"Funnel RAM" intake kit
- More power to PULL & TOW
- Lower your EGT's
- Includes filter minder port
- Pre-Assembled
- Installs in 15 minutes
250% Increase in air
flow
Magnum FORCE TM= 820 CFM*
Stock = 377 CFM*
More Filter Media
1000 IN. sq. of filter surface area
OR
CHOOSE
STAGE
TWO MAGNUM FORCE INTAKE (Item # 10072)
GAIN
APPROX. 25 HP AND 40FT TORQUE
FEATURES:
- Deepest pleats in the industry
- Polyurethane construction
- Powder-coated steel housing
- Welded heat-shield
- Sealed lid
BENEFITS:
- Increased airflow and filtration
- Longer filter life
- Corrosion resistant finish
- Lasting construction
- For quieter engine noise
Sealed Lid for quieter engine noise and great looks.
Comes with embossed aFe logo and rib's. (removed to show filter)
Hi-temp rotational molded intake tupe with huge 6" filter opening for big performance
gains.
Durable 16 gauge powder-coated steel housing.
FILTER
CLEANING KIT (Item
# 90-50001)
1
(12oz) air filter cleaning agent
1 (6.5oz) aerosol oil spray
Cleans and restores your filter to orignal condition.
T409 STAINLESS STEEL EXHAUST (Item # PM-D9402-409)
These exhaust systems are Customed Tuned for use with our performance chips and tuners!!! Each exhaust system is precision manufactured using T409 Stainless Steel. Complete Turbo Back Mandrel Bent Stainless Steel 4" Exhaust System. This is a complete Stainless steel bolt on exhaust kit.
The advantages of the larger pipes are:
- Lower Exhaust Gas Temperatures
- Horsepower increases of 22hp to 27hp and 35 to 42 ft/lb of torque
- Increase in fuel mileage of up to 1.5 MPG
