Adrenaline Engine Control System
2003-2007 Ford 6.0L Powerstroke
Introducing the most powerful, most feature rich, easiest to install, and most user adjustable on-the-fly engine management system ever produced for the 6L Ford. The Adrenaline module is packed full of usable and useful features unlike other products on the market.
The heart of the Adrenaline uses proprietary software unlike any other on the market allowing us to control the entire engine via the engines control bus. Our Failsafe technology means that under NO circumstance will you ever have any truck reliability issues even if the worst case scenario presents itself!
The Adrenaline utilizes its 100% control over injector pulse width, injection timing and injection control pressure to increase efficiency and add more power. This is a unique combination that before now was only available by buying multiple products and using them together.
The Adrenaline/Pulse is much more than a power adder or fuel mileage enhancement unit. With the Pulse you have access to over 20 parameters to monitor, record, and set alarms for. You also may set de-fueling settings for most of the monitored parameters. The Adrenaline does not simply cut fuel, but matches the fueling and timing curves to maximize power output while keeping exhaust temperatures below your preset level. Simply put, it is by far the safest and smoothest engine protection system on the market.
On your Pulse monitor there is a host of features that you will love. In addition to all the gauges, you have the ability to adjust your Turbo Timer, set cold engine protection parameters, adjust fueling during shifting, test 0-60 MPH and ¼ mile times, and recall your minimum and maximum achieved parameters.
If you need more you may choose to purchase an unlock code that allows you to custom tune your Adrenaline on-the-fly via the Pulse monitor. With this feature unlocked you will be able to set maximum pulse width, maximum timing advance, maximum injection pressure, decide when to add fuel and control the pedal feel of the power plus much more!
There is no other performance product on the market that can match the features, mileage gains and power gains of the Adrenaline module.
The Pulse Control Monitor (PCM) is the latest state of the art advancement from Quadzilla. Made to work exclusively with the Adrenaline series of modules, the Pulse is the most technologically advanced monitoring system on the market.
Relying on our experience with the extremely popular and successful Commander Control System, we were able to perfectly match cutting edge technology with simplicity. Never before has it been so easy to do so much.
Installation is a snap with one simple connection to the Adrenaline wiring harness and you are ready to go. We also have a complete line of full length and half length pillar mounts based on your application.
For the first time in the diesel world, you will now have the ability to custom tune your Adrenaline module on the fly with the use of the Pulse! With a few button presses you will be able to control the max fueling and max timing amount plus the ability to shape your own power curve!
For the Pulse, we have also added performance tests so you can monitor your results from custom tuning. This includes 0-60mph performance as well as ? and ¼ mile tests.
Parameters Monitored - with additional User Defined Warnings on all parameters:
EGT, Boost, Transmission Temp, Coolant Temp, RPM, MPH, Corrected MPH, ECM Voltage, Back-down %, TPS%, IAT, Fuel Temperature, Power Level, Oil Pressure*, Engine Load%
User Defined De-fuel Settings:
EGT, Boost, Transmission Temp, Coolant
User Controlled Features:
Turbo Timer (select time or EGT based, control desired run-time or EGT for shut-off)
Warm Up (select coolant temperature at which the Adrenaline starts adding power)
High Idle Delay (select amount of time before high idle activates in an idle state)
User Controlled Custom Tuning**
Control 7 custom tuning options including:
Timing Advance, Can Bus Fueling, Pump Stretch Fueling and Throttle Response options.
Min/Max Recording Log for:
EGT, Boost, Transmission Temp, Coolant Temp, RPM, MPH, Corrected MPH, ECM Voltage, Back-down %, TPS%, IAT, Fuel Temperature, Power Level, Oil Pressure*, Engine Load %